Hawaii Department of Transportation

07/10/2026 | Press release | Distributed by Public on 07/10/2026 19:49

Two speed tables to be installed on Hāna Highway in Pāʻia beginning Monday, July 13

Two speed tables to be installed on Hāna Highway in Pāʻia beginning Monday, July 13

Posted on Jul 10, 2026 in Highways News, Main, News

KAHULUI, Hawaiʻi - The Hawaiʻi Department of Transportation (HDOT) notifies highway users of a single lane closure on Hāna Highway (Route 36) from 8 a.m. to 3:30 p.m. on Monday July 13 to Tuesday, July 14. The closure will be near mile post 6.9 in the vicinity of 170 feet north of the crosswalk near Lae Place and the Pāʻia Hawaiian Protestant Church, for work to install speed tables. Alternating traffic will be routed through the open lane.

Thirteen crashes have occurred on this section of Hāna Highway between 2021 and 2025. HDOT gathered community concerns and made the decision to install speed tables at these locations based on crash history and speed data. Speed surveys showed the majority of drivers in the area were traveling at 40 mph or greater. This is more than 10 mph over the 25 mph limit in the southbound lanes and more than 10 mph over the 30 mph limit that applies in the northbound direction.

Temporary striping will be applied to the speed tables with permanent striping scheduled for the end of July 2026.

Electronic message boards have been placed to let the community know of the upcoming work and will remain there throughout the project.

See weekly lane closures on our website at, https://hidot.hawaii.gov/highways/roadwork/maui/

# # #

Media contact:

HDOT Public Affairs Office

Phone: 808-587-2160

Email: [email protected]

Hawaii Department of Transportation published this content on July 10, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on July 11, 2026 at 01:49 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]