11/16/2026 | Press release | Archived content
In its 57-year history, Embraer has produced a wide array of aircraft - evolving from licensed production of general aviation light airplanes to today's modern production of business jets, small narrowbodies, and military transports.
However, building on its rich history of producing more than 9,000 aircraft, the company recently delivered a new type of plane that it has never manufactured before: a dedicated cargo aircraft, or freighter.
On March 9, 2026, the first Embraer E190F entered service in Europe with Bridges Air Cargo. Its first commercial flight, from Cologne, Germany, to Larnaca, Cyprus, carried time-sensitive express materials. The aircraft is powered by two GE Aerospace CF34-10E engines.
"The E190 freighter provides the solution for a midsize narrowbody jet requirement," says Guy Bridges, founder and CEO of Bridges Worldwide. "If you have a 10-to-12-ton requirement, the E190F is the logical choice."
The E190F was built for a gap in the market. Express and e-commerce networks increasingly reach secondary and tertiary cities, and operators have had to choose between turboprops, which run out of range and capacity, and larger narrowbody freighters that are expensive to operate. Embraer designed its E-Freighter to sit between the two, opening new markets and replacing older, less efficient aircraft.
We spoke with industry leaders about aircraft and engine operations, early lessons from service, and what comes next. The following conversation took place between Guy Bridges, founder and CEO of Bridges Air Cargo; Oliver Gerg, senior vice president for Global Leasing & Freighter at Embraer; and Vivek Kuppusamy, general manager for regional and business aviation at GE Aerospace.
GE Aerospace Reports: What market gap did Embraer see that made the E190F the right freighter solution now?
Oliver Gerg (Embraer): The E-Freighters were developed to fill the gap between turboprops and larger narrowbodies, and to replace older, less efficient models. Designed specifically for this market, the E-Freighter lets operators open new markets, move goods faster, and deliver standout economics.
Guy Bridges (Bridges Air Cargo): It fills the gap between the ATR 72 and the 737-800.
GE Aerospace Reports: What qualities matter most in an engine for regional freighter operations, and how does the CF34-10E support those needs?
Vivek Kuppusamy (GE Aerospace): Reliability comes first. Cargo customers live by their schedules, so the engine has to dispatch and stay on the wing day after day. Durability matters just as much. The CF34-10E has passed 44 million flight hours, and the CF34 family has nearly 240 million, so E190F operators get a mature engine backed by a global support network.
Gerg: The E-Freighter is built on the proven E-Jets platform, with decades of operational success, and delivers the reliability the express air freight industry requires. With the CF34-10E, E190F operators get proven reliability and a globally established support network that is invaluable to cargo operators.
Bridges: Reliability is probably the most important quality, particularly when serving the express community, where customers depend on schedule integrity. The CF34-10E provides that proven reliability, while also delivering the efficiency and performance we need for regional freighter operations.
GE Aerospace Reports: How does this aircraft-and-engine combination balance payload, range, economics, and reliability?
Gerg: E-Freighters are modern, fuel-efficient aircraft that meet Stage 4 noise requirements. Compared with larger narrowbodies, they deliver 30% lower operating costs with similar range. They offer 47% additional payload capacity and more than three times the range of large cargo turboprops, so operators can maximize their yield.
Bridges: It gives us a very strong balance across all four. The E190F provides the payload and range we need for the regional markets we are targeting, while the CF34-10E brings proven reliability and good operating efficiency.
GE Aerospace Reports: What early lessons or feedback stand out from bringing the E190F into service?
Gerg: Early operations have demonstrated the E190F's suitability for time-sensitive cargo missions. The in-service performance supports our view that there is a clear market need for a modern freighter positioned between turboprops and larger narrowbody cargo aircraft.
Bridges: We are still relatively early in the program, but the combination of capacity, efficiency, and reliability has performed well, and we are continuing to learn as we build more experience with the aircraft.
GE Aerospace Reports: How does this milestone fit into GE Aerospace's broader history supporting freighter aircraft?
Kuppusamy: GE Aerospace has powered freighters for decades. CF6 engines power widebody freighters such as the Boeing 767F, GE90 engines power the 777 Freighter, and CFM56* engines power Boeing Converted Freighters. The E190F brings that same reliability and durability to a right-sized regional jet. The CF34 engine started on the Bombardier Challenger 601 business jet in 1983 and helped launch the regional jet segment on Bombardier's CRJ100 in 1992, so cargo is a natural next chapter.
GE Aerospace Reports: What should customers and the cargo industry watch for next as E190F operations expand?
Gerg: Recent achievements, including the E190F's entry into service with Bridges Air Cargo and Azorra's commitment to 20 firm conversions plus 10 purchase rights, highlight the market momentum behind the platform. As the program matures, the E190F will enter new global markets. Customers should watch for new operators, broader market adoption, and further validation of the E190F as an efficient solution for regional cargo networks.
Bridges: The E190F is still finding its place in the cargo market. It is a new proposition, and the opportunity is in identifying the routes and customers where its size, economics, and flexibility make sense.
Kuppusamy: We're continuing to invest in the CF34 portfolio to help ensure the continued success of regional and cargo operations. As more E190Fs enter service, we are continuing to work closely with operators and Embraer to support new fleets and share what we learn.
* CFM56 engines are a product of CFM International, a 50-50 joint company between GE Aerospace and Safran Aircraft Engines.