Florida Department of Agriculture and Consumer Services

08/27/2026 | Press release | Distributed by Public on 08/27/2026 07:36

Kmaier Recalls Infant Walkers Due to Risk of Serious Injury or Death from Fall Hazard; Violate Mandatory Standard for Infant Walkers

  • Share:

  • Share it on Facebook
  • Share it on Twitter
  • Copy Link
  • Print Page
  • Copy link
  • Recalled Kmaier Infant Walker - pink
  • Recalled Kmaier Infant Walker - green
  • Recalled Kmaier Infant Walker - white
  • "Model No.: RV001" is printed on a label located under the seat
Name of Product:
Kmaier Infant Walkers
Hazard:

The recalled walkers violate the mandatory standard for infant walkers because they can fit through a standard doorway and fail to stop at the edge of a step, posing a deadly fall hazard.

Remedy:
Refund
Recall Date:
August 27, 2026
Units:

About 243

Consumer Contact

Kmaier by email at [email protected].

Recall Details

Description:

This recall involves Kmaier-branded infant walkers. The pink, green or white walkers have a tray, a fabric seat and a round base with six-wheels. The walkers can be adjusted to nine different height levels. "Model No.: RV001" is printed on a label located under the walker's seat.

Remedy:

Consumers should stop using the recalled walkers immediately and contact Kmaier for a full refund. Consumers will be asked to disassemble the walker; destroy it by cutting the walker's fabric seat and writing in permanent marker "Recalled" on the top of the tray; and send a photo of the destroyed walker to [email protected]. Consumers should then dispose of the recalled product.

Incidents/Injuries:

None reported

Sold Online At:
Target.com in June 2026 for between $62 and $70.
Retailer:

FENUN, Inc., dba Kmaier, of Pasadena, California

Manufactured In:
China
Recall number:
26-721

Related Recalls

The glued knot on the elastic cord can become untied on the recalled product, allowing young children access to the small wooden and plastic pieces, posing a risk of serious injury or death from choking and ingestion hazards.

The baby jumper, baby swing and 2-in-1 baby jumper & swing can become unstable, posing fall and impact hazards. Additionally, the hanging restraint straps and seat openings can pose strangulation hazards.

The recalled teething toys violate the mandatory standard for toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of children's throat and become lodged, posing a serious risk of respiratory distress and a deadly choking hazard.

The recalled mattresses violate the mandatory safety standard for crib mattresses because the mattresses may not adequately fit certain play yards, posing a deadly entrapment hazard. Babies can suffocate in gaps between an undersized mattress, or extra padding, and side walls of a product, especially when the infant's face becomes trapped against the side and the mattress, preventing the infant from breathing. Furthermore, the full-sized crib mattresses violate the mandatory flammability standard for mattress sets, posing a risk of serious injury or death from fire.

About the U.S. CPSC

The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.

For lifesaving information:

Choose Your Recall Emails Get Notified About Each Recall via Email.
Florida Department of Agriculture and Consumer Services published this content on August 27, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on August 27, 2026 at 13:36 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]