C-NLOER - Canada–Newfoundland and Labrador Offshore Energy Regulator

11/02/2026 | Press release | Distributed by Public on 11/02/2026 10:45

Spill of Synthetic-Based Mud from the West White Rose

On October 29, 2026 Cenovus reported a spill of approximately 1,400 litres of synthetic-based mud (SBM) from the West White Rose Platform.

The release occurred during completions operations through the cuttings discharge chute, approximately 63 metres below sea level. No indication of the release was observed at the sea surface from the platform or the standby vessel, which conducted a sweep of the area.

As a precaution, operations were suspended on the West White Rose on October 29 while Cenovus investigated the circumstances surrounding the release. Operations resumed the next day with measures in place to prevent recurrence. C-NLOER Environmental Protection and Well Operations staff were engaged by Cenovus prior to the resumption of operations and are continuing to monitor Cenovus's investigation and response.

SBM is a dense fluid used during drilling and well operations. It is a mixture of synthetic base fluid, a food-grade oil, and various weighting agents and additives. The synthetic base fluid has very low toxicity in marine environments, with the potential to biodegrade when sufficient oxygen is present. Because of its density, SBM generally sinks and settles, with effects due to the seabed coverage near the release, limited to within tens of metres of the discharge location.

Media Contacts:

Cenovus Energy
Colleen McConnell
(709) 724-3504
[email protected]
[email protected]

C-NLOER
[email protected]

Incident Disclosures 2026

Date Update
Nov 2, 2026 Spill of Synthetic-Based Mud from the West White Rose
Oct 28, 2026 C-NLOER Reviewing October 9 Incident on the Terra Nova FPSO
Jul 23, 2026 Dropped Object on Hibernia Platform
Jun 26, 2026 C-NLOER Reviewing May 12 Incident on the Hibernia Platform
C-NLOER - Canada–Newfoundland and Labrador Offshore Energy Regulator published this content on November 02, 2026, and is solely responsible for the information contained herein. Distributed via Public Technologies (PUBT), unedited and unaltered, on November 02, 2026 at 16:45 UTC. If you believe the information included in the content is inaccurate or outdated and requires editing or removal, please contact us at [email protected]