11/16/2026 | Press release | Distributed by Public on 11/16/2026 12:01
San Joaquin County - District 10 maintains more than18,000 culverts with a combined 1.6 million linear feet of pipe that carry water away from highways to prevent erosion and flooding and support the natural movement of streams, rivers, and wildlife.
Culverts are installed where roads, driveways, or embankments cross streams, swales, or low-lying areas that collect runoff, Drainage Coordinator Oscar Meda said. They typically follow the natural stream channel, with location and size based on upstream drainage, rainfall intensity, channel slope, and expected water velocity.
Maintenance Engineering works with the Culvert Inspection Program (CIP), which includes six maintenance supervisors. The CIP maps and inspects culverts and flags those that are clogged or deteriorating so the Drainage Coordinators can ensure they are cleaned, repaired, or replaced before catastrophic flooding or washout.
Headquarters started the program in 2005 to locate and map culverts statewide, identify drainage-system deficiencies, and establish an inspection and maintenance schedule to increase public safety and protect infrastructure.
Today, the location of every mapped culvert in the state is recorded in the Culvert Inspection Management System (CIMS), along with corresponding information, including its last inspection history, condition score, and measurements.
Detailed inspections with rovers and drones
On a cool, overcast October day, CIP Coordinator Raul Espenoza inspected a series of culverts on State Route 4 in San Joaquin and Stanislaus Counties. He described the types of culverts: reinforced concrete, corrugated steel, Plastic, stone, and even wood. He said culvert systems can have one pipe or multiple side-by-side pipes, but they cannot exceed 20 feet in diameter; anything larger is considered a bridge.
Inspectors input detailed measurements and observations into CIMS. They look for buildup that requires cleaning; culvert deficiencies such as warping and sagging; corrosion, rust, or rot; gaps in the joints and erosion around the drainage inlets and outlets; and standing water.
Raul also inspected three newly installed culverts to verify construction quality and ensure they met program standards.
At a multi-pipe culvert system in Farmington, Raul found standing water despite no recent rain. He sent R3, a rover with a mounted camera, down one pipe to look for obstructions. The rover's interchangeable wheel sets let it navigate culverts as small as six inches in diameter and handle slippery, sandy, or uneven conditions.
In another pipe, he used a pole camera with a powerful zoom lens to inspect it because a large piece of concrete blocked the rover from entering.
The crews also recently acquired two drones to inspect culverts on steep terrain, avoiding fall hazards, wildlife encounters like snakes, and vegetation exposure such as poison oak.
Raul determined the water backup stemmed from deficiencies in a neighboring jurisdiction's drainage system. District drainage coordinators will work with that agency to identify and implement a solution.
Addressing these issues ahead of winter is crucial, particularly this year with a forecasted strong El Niño; the team has been busy.
Protecting the public by protecting the infrastructure
Inspection reports, along with photographs and video, are uploaded to CIMS. Twice-monthly reports identify culverts that need cleaning and those that need repair or replacement.
Drainage coordinators use this information to help prioritize culverts in poor or fair condition for future projects, ensuring the district's drainage infrastructure remains reliable and functional.
Over the past three years, more than 200 culverts have been replaced, and approximately 916 more have been programmed for future replacement, said Oscar.
By identifying problems before they become failures, the Culvert Inspection Program enhances public safety, protects transportation infrastructure, and reduces costly emergency repairs, saving taxpayer dollars while keeping California's highways open and resilient
For the safety of workers and other motorists, please Be Work Zone Alert. Caltrans also reminds motorists to #KnowBeforeYouGo by checking QuickMap.dot.ca.gov for the latest highway conditions prior to travel.
Motorists should expect 5-to-10-minute delays and use alternate routes whenever possible. All work is scheduled to occur as listed but is subject to change due to traffic incidents, weather, availability of equipment/materials, and construction-related issues.
For the safety of workers and other motorists, please Be Work Zone Alert. For the latest highway conditions, visit quickmap.dot.ca.gov