11/19/2026 | Press release | Distributed by Public on 11/19/2026 04:48
GHGSat's next-generation aerial methane measurement solution, DATA.AIR Gen2, is now approved by the U.S. Environmental Protection Agency as an alternative test method for periodic screening under the Subpart OOOOb methane rule under the EPA's Advanced Methane Detection Alternative Test Method program (MATM-021).
Oil and gas operators can now use GHGSat aerial measurements to meet periodic screening requirements for fugitive emissions at the 10 kg/hr threshold, with facility-level spatial resolution. DATA.AIR Gen 2 is approved for the alternative periodic screening process in 40 CFR 60.5398b(b), for broad use across the sector.
Inside the technology
DATA.AIR Gen2 relies on a short-wave infrared spectrometer to see methane emissions that are invisible to the human eye. Mounted on an aircraft, it flies over oil and gas sites, building a detailed methane concentration map. GHGSat's analysts use the map to identify, localize and quantify emissions at the equipment level.
GHGSat harnesses a multi-tier approach to methane monitoring, built on a single core technology that works from both space and the air. Its pioneering satellites, the first and largest constellation to trace methane to individual facilities, provide frequent, wide-area monitoring, flagging the largest emissions. Its aircraft fly closer to the ground, where they can find smaller leaks and give operators the detail required for compliance screening and repairs.
What this means for operators
With this certification, operators can use GHGSat data directly for compliance. An aerial approach lets operators screen more sites with less resources. A single flight can cover many facilities in a day, including remote or hard-to-reach sites, and doesn't require crews on the ground at every location, saving precious personnel time. With DATA.AIR, operators get a clear picture of where emissions are coming from, so repair teams can quickly address emissions at their source. Because GHGSat delivers DATA.AIR's data as a service, within hours of a detected plume, operators get compliance-ready results without running the technology themselves.
The approval rests on rigorous testing. In a blinded controlled-release study in Southern Alberta, DATA.AIR Gen2 was challenged with 110 measurements at release rates from 2.5 to 22.5 kg of methane per hour, in realistic conditions with wind speeds of roughly 3 to 6 m/s. It achieved 90% probability of detection well below the 10 kg/hr threshold.
In addition, DATA.AIR Gen2 has been tested and validated by Colorado State University's Methane Emissions Technology Evaluation Center (METEC), the global benchmark for controlled-release verification of methane detection systems. METEC confirmed best-in-class performance, validating that DATA.AIR technology can detect methane emissions at 3.5 kg/hr with a 90% probability of detection.
GHGSat's method defines a survey plan intended to ensure full site coverage, sets data quality criteria, including wind speed bounds, to confirm when data is valid, and keeps records that third parties, such as state regulators, can audit.
"EPA approval of DATA.AIR Gen2 means operators can draw on advanced methane detection technology to demonstrate compliance, and do it at lower cost than traditional methods," said Stephane Germain, GHGSat CEO. "Operators get a trusted, regulator-recognized way to find and fix emissions across their facilities, and more of that methane stays in the pipeline instead of escaping into the atmosphere."
Get in touch
Ready to put DATA.AIR Gen2 to work on your operations? Contact GHGSat to talk with our team about scheduling a survey and meeting your methane compliance requirements.